CUMMINS Home Standby Generator Set Manual de instalación Pagina 72

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 100
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 71
7. Operation 4-2010
7.13.2 Manual Load Management
CAUTION: To reduce unnecessary loss of service, it is highly recommended that manual load
management be undertaken only by an authorized Cummins Onan dealer.
When set to manual mode, the user is able to view, connect, and disconnect loads. If the
connection of loads L1 and L2 exceeds generator capacity, the AC circuit breaker trips.
To select manual load management when the generator is running:
1. Press the LOAD button on the home screen.
2. Press the up or down arrow button to select Manual.
3. Note which loads are connected or disconnected.
4. Press the double-down arrow button to go the load connect/disconnect screen.
5. Connect or disconnect Load 1 or Load 2 as necessary by pressing either button under
Load 1 or Load 2.
6. Press the BACK button to save the setting and return to the home screen.
FIGURE 58. LOAD MANAGEMENT SCREEN
68 A029V088 (Issue 2)
Vista de pagina 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 99 100

Comentarios a estos manuales

Sin comentarios