CUMMINS ED-3 Manual de instalación Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 67
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Natural Gas Generator Set Installation Manual-GF Series
Doc. 17855, Rel. 03/2014
3-7
6. Do not impose external force(s) on the catalyst
housing greater than 22.7 kg (50 lb) in any direc-
tion.
7. It is required to put a flexible tubing (i.e. bellows
or flex pipe) between the engine and the begin-
ning of the exhaust piping. This will isolate the 3-
way catalyst and other downstream components
from engine vibration.
8. For vertical flow mounting, ensure that the stack
above the catalyst is independently supported.
See Figure 3-5.
9. Avoid cantilevering loads off the end of the 3-
way catalyst.
10. The engine oil shall meet CES 20074 or better
specifications as required by the engine manu-
facturer.
11. The catalyst must be installed to guarantee air
exhaust temperature into the catalyst of 482°-
649° C (900°-1200° F). Any temperature outside
this range may affect catalyst performance or
life.
12. The catalyst can be installed either upstream or
downstream of the silencer to obtain sufficient
exhaust inlet temperatures.
3.8.2 Owners Responsibilities
1. The owner is responsible for keeping the natural
gas 3-way catalyst system on the equipment
because the removal of the system may cause a
violation of the local emission regulations.
2. The owner is responsible for periodic inspection
of the system in accordance with these and
other operational instructions.
3. The owner is responsible for maintaining the
operation of the engine in a way that would NOT
adversely affect the natural gas 3-way catalyst
system. Any misfire, stack detonations, oil or
debris in the exhaust system, shall be recorded
in the equipment’s service record.
4. The owner is responsible for maintaining com-
plete oil consumption and service records, as
well as software files, where applicable, and to
make them available to a requesting Cummins®
authorized repair location for troubleshooting
purposes.
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 66 67

Comentarios a estos manuales

Sin comentarios