CUMMINS N14 Especificaciones descargar pdf (Pagina 312)

100

101

Measure the cam follower roller side clearance.

Roller Side Clearance

mm in

0.23 MIN 0.009

0.61 MAX 0.024

NOTE: If the roller side clearance is not within these spec-

ifications, the roller must be replaced. Refer to Cam Follower

Lever - Roller Replacement (04-03).

Use a dial indicator to measure the cam follower to roller

pin clearance.

Roller to Pin Clearance

mm in

0.08 MIN 0.003

0.20 MAX 0.008

NOTE: If the roller to pin clearance is not within these spec-

ifications, the roller and the pin must be replaced. Refer to

Cam Follower Lever - Roller Replacement (04-03).

Visually inspect the sockets for excessive wear or dam-

age.

A good even seating pattern must be seen when inspect-

ing the cam follower socket.

When parallel grooves and scratches are observed or the

contact area extends into the oil hole chamfer of the

socket, the worn socket must be replaced.

NOTE: If excessive wear or damage is found in the sockets,

the sockets must be replaced. Refer to Cam Follower Socket

- Replacement (04-04).

Do not use push rods with worn balls in cam followers with

new sockets. Refer to Push Rod - Cleaning and Inspection

for Reuse (04-05).

Cam Follower Assembly - Cleaning and Inspection for Reuse (04-01) Cam Follower Assembly

N14Page 4-6

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 586 587

Comentarios a estos manuales

Jesus Morales 03 Apr 2025 | 23:07:31

Perfect..

CUMMINS N14 Especificaciones Pagina 312

Comentarios a estos manuales